ECU Master Advanced Display Unit ADU - Dash display
ECU Master Advanced Display Unit ADU - Dash display
ECU Master Advanced Display Unit ADU - Dash display
ECU Master Advanced Display Unit ADU - Dash display
ECU Master Advanced Display Unit ADU - Dash display
ECU Master Advanced Display Unit ADU - Dash display

ECU Master Advanced Display Unit ADU - Dash display

Regular price $2,149.00 $2,099.00 Sale

The ADU is equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-dependent shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.).
Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.

User configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre).
Communication with other devices in the car is provided via two built-in, independent CAN-BUS communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.

To ensure that all features work seamlessly, our device is based on a 32-bit automotive controller paired with a state of the art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second.
For further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.
All of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.

General Specifications:

  • Operating voltage: 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection
  • CPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C
  • Enclosure: Anodized aluminium, CNC machined, IP61 Connector: Automotive 36-way AMP connector
  • 5” display: Antiglare TFT, 800x480, active area 108x64.8mm, luminance 600 cd/m2
  • 7” display: Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500 cd/m2
  • Alarms: 15 x ultrabright RGB LEDs
  • Communication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx,Tx)
  • USB: Yes, for data logging (dash programming must be done via CAN, using CAN to USB adapter, Peak Pcan, or Kvaser cable)
  • Inputs: Analogue inputs: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns
  • Digital inputs: 8 inputs with user defined sensitivity Outputs: General purpose 2 x protected 3A low side outputs


  • Accelerometer: 3 axis gyro and 3 axis acceleration
  • Light sensor: Built in for auto brightness
  • Temperature sensor: Built in to trace device internal temperature
  • Real time clock: Built in with battery backup
  • Features: Lap Timer: Lap timer with memory, predictive timing, triggered by a beacon or GPS
  • Customization: 48 available pages, user defined content, custom graphics allowed
  • Functions: Math channels logical functions
  • Overlays: Yes, user defined
  • CAN stream: User defined, up to 48 input messages, predefined streams for popular ECUs


The 5" model is available in IP65 specification, perfect for the rough (and potentially wet) life in a rally car or offroading.

The 7" model is also available with an Autosport connector for the serious racing enthusiast.

Supported ECUs 

  • AEM
  • Autronic SM-4
  • DTA Fast S Series 
  • Ecumaster EMU Classic Serial
  • Ecumaster EMU Classic CAN
  • Ecumaster PMU
  • Emtron
  • EVO X
  • Hondata Kpro
  • Life Racing
  • MaxxECU
  • Megasquirt 2 & 3
  • MoTeC M400 M600 M800
  • MoTec M1
  • Pectel SQ-6
  • Syvecs
  • VI-PEC
  • OBD 2 over CAN ecus
  • Any ECU able to send data over CAN BUS 

Note this product comes from Europe and could take up to 15 working days.